Products

Snow melting cables

Snow melting cables

for snow & ice melting out doors

Thermo Snow Melting Cables (SMC) are thick cables for embedding in concrete, asphalt or under pavement surfaces. These are widely used in drive ways, pavements, roads, ramps, bridges, parking-bays etc., to melt snow or ice during winter seasons.

SMC is one of the best solutions for preventing ice from damaging roofs and gutters and causing a personal injury.

Construction

Snow Melting Cable consists of a resistance element provided with primary fluoropolymer insulation, metal shielding and secondary insulation of Polyolefin.

Heating cable is twin conductor with 6.0 mm outer diameter and terminating on cold leads at one end of the mat. SMC comes with a 5.0 m length cold leads as a standard.

FEATURES
Standards Meets all test requirements of IEC 60800.
Approvals SMC carries FIMKO certification.
User-friendly Works silent and unobserved.
Cost-effective Provides heat where required, resulting in optimal heat utilization and minimal losses.
Safety Thermostats backed by optional over current protection and GFCI ensures total protection and safety.
Range A wide range of sizes in various lengths and standard widths ensure suitability to various layouts.
Custom-built In addition to this wide range, mats could be designed to suit individual requirements of length, width and heat loads and voltage requirements could be designed.

Range

Snow Melting Cable, Twin Conductor Rating: 30W/M at 230VAC
CATALOG REFERENCE Length (M) Watts (W)
SMC-T-30W/850 29.0 850
SMC-T- 30W/1100 38.0 1100
SMC-T- 30W/1400 47.0 1400
SMC-T- 30W/1700 57.0 1700
SMC-T- 30W/2000 67.0 2000
SMC-T- 30W/2250 75.0 2250
SMC-T- 30W/2500 84.0 2500
SMC-T- 30W/2800 94.0 2800
SMC-T- 30W/3350 112.0 3350
SMC-T- 30W/4000 134.0 4000
SMC-T- 30W/4500 150.0 4500
SMC-T- 30W/5000 168.0 5000

All these cables could be delivered also in 400 V version.

For more details and business enquiries, please contact us

back to product list