Products
Laminate floor heating mat (LFM)
for laminate floor and under-carpet heating
ThermoLAM is ultra thin electric radiant floor heating system primarily for use under laminate, engineered wood, glued hardwood and other floating floors. Advantage of using ThermoLAM is the ease of installation and uniform heating of your laminate flooring. The special materials used makes it free from problems of "Hot-Spots" or localized heating.
Construction
ThermoLAM system is made with fluoropolymer insulated heating cables. These are sandwiched between two layers of specially reinforced aluminium foil. The uniform spacing of the heating elements, further backed by the aluminium foil, ensures even heat distribution. The heating element is connected to a power-supply cable, which exits the laminate mat from one corner. The power lead is a flat thin two core flexible cord, consisting of two insulated conductors with a metal sheath and an outer sheath.Depending on your heating requirement, ThermoLAM is available in nominal heat outputs of 80 W/m2 and 140 W/m2. It is available in predetermined lengths with cold tail - prefabricated & tested in a carefully controlled factory environment.
Conergy Solutions is also fully geared to meet any of your customized heating requirements.
| FEATURES | |
| Standards | Meets all test requirements of IEC 60335 |
| Approvals | Conforms to the requirements of CE Marking |
| User-Friendly | Ease of laying and connection, temperature control through programmable / non-programmable thermostat |
| Comfort | Uniform Heating and thermostat control provides ultimate 'warm' experience |
| Safety | Proper earthing provision is provided for safety. Conforms to the product Safety requirements as per latest EU Directives |
| Range | A wide range of heat-loads and sizes ensure suitability to different sizes / kinds of floorings |
| Custom-Built | Individual Requirements of heat-loads, voltage requirements, lengths & width can be designed & manufactured. Can be supplied with one-side adhesive with release paper for ease of installation. |
| Environment Friendly | Over 90% of ThermoLAM consists of metal, primarily Aluminium, which is now considered as a "Green-Metal". Also it does not emit any green-house gases while heating. |
| SPECIFICATIONS | |
| Construction | Aluminium Foil Heater with Twin Conductor having primary insulation of FlouroPolymer, Sandwiched between 2 layers of Specially Reinforced Aluminium Foil. |
| Standard Wattage | 80 W/Sq.Mt and 140 W/Sq.Mt |
| Width of the mat | 500 mm |
| Heating Cable Spacing | 50mm |
| Cold lead | 3.0 M |
| RANGE (80W) | ||||
| Catalogue Reference No. | Length of the Mat (mtr) | Width of the Mat (mm) | Area Sq M | Watts (W) |
| LFM-T-80W/80 | 2 | 500 | 1.0 | 80 |
| LFM-T-80W/120 | 3 | 500 | 1.5 | 120 |
| LFM-T-80W/160 | 4 | 500 | 2.0 | 160 |
| LFM-T-80W/200 | 5 | 500 | 2.5 | 200 |
| LFM-T-80W/240 | 6 | 500 | 3.0 | 240 |
| LFM-T-80W/280 | 7 | 500 | 3.5 | 280 |
| LFM-T-80W/320 | 8 | 500 | 4.0 | 320 |
| LFM-T-80W/360 | 9 | 500 | 4.5 | 360 |
| LFM-T-80W/400 | 10 | 500 | 5.0 | 400 |
| LFM-T-80W/480 | 12 | 500 | 6.0 | 480 |
| LFM-T-80W/560 | 14 | 500 | 7.0 | 560 |
| LFM-T-80W/640 | 16 | 500 | 8.0 | 640 |
| LFM-T-80W/720 | 18 | 500 | 9.0 | 720 |
| LFM-T-80W/800 | 20 | 500 | 10.0 | 800 |
| Range (140W) | ||||
| Catalogue Reference No. | Length of the Mat (mtr) | Width of the Mat (mm) | Area Sq M | Watts (W) |
| LFM-T-140W/140 | 2 | 500 | 1.0 | 140 |
| LFM-T-140W/210 | 3 | 500 | 1.5 | 210 |
| LFM-T-140W/280 | 4 | 500 | 2.0 | 280 |
| LFM-T-140W/350 | 5 | 500 | 2.5 | 350 |
| LFM-T-140W/420 | 6 | 500 | 3.0 | 420 |
| LFM-T-140W/490 | 7 | 500 | 3.5 | 490 |
| LFM-T-140W/560 | 8 | 500 | 4.0 | 560 |
| LFM-T-140W/630 | 9 | 500 | 4.5 | 630 |
| LFM-T-140W/700 | 10 | 500 | 5.0 | 700 |
| LFM-T-140W/840 | 12 | 500 | 6.0 | 840 |
| LFM-T-140W/980 | 14 | 500 | 7.0 | 980 |
| LFM-T-140W/1120 | 16 | 500 | 8.0 | 1120 |
| LFM-T-140W/1260 | 18 | 500 | 9.0 | 1260 |
| LFM-T-140W/1400 | 20 | 500 | 10.0 | 1400 |
For more details and business enquiries, please contact us